月地高速再入返回器热控设计及实现

针对月地高速再入返回器不同阶段大功率散热、小功率保温与高速返回过程中高温隔热之间的突出矛盾,以及狭小、局促空间内设备热量的收集、传输、排散与阻断等技术难题,首次构建一种基于柔性自适应"热开关"的小型再入返回类航天器热控体系,成功研制出一套基于异构式环路热管的一体化柔性、高效热管理系统.在轨飞行数据表明:核心热控产品环路热管控温运行模式下实际传热能力超过65 W,阻断模式下漏热量小于2 W,"热导比"大于30,能够很好地实现"热开关"功能,确保了返回器所有设备的温度水平优于指标要求.     

仿生非光滑花纹沟对轮胎抗滑水性能的影响

以205/55R16乘用车轮胎为研究对象,采用计算流体动力学建立了考虑胎面花纹变形的轮胎滑水分析模型;以气-液二相流数值模型分析了轮胎的滑水性能,并将临界滑水速度仿真值与NASA滑水速度预测值及轮胎发生滑水时力平衡下的速度进行对比.在此基础上,引入仿生减阻理念,研究了夹角为60°、高度为0.6mm的仿生对称V形结构对花纹沟排水量和水流阻力的影响,并将其结构特征信息等效移植到接地区轮胎花纹沟底,进行了仿生花纹轮胎的滑水性能分析.结果表明:所建滑水分析模型可用来分析轮胎滑水时的流体运动特性;相对原花纹轮胎,仿生非光滑花纹沟轮胎通过提高接地区花纹沟内水流速度,降低了胎面动水压力,提高了临界滑水速度.     

A Novel Routing Method for Social Delay-Tolerant Networks

The lack of continuous connectivity and a complete path from source to destination makes node communication quite difficult in Delay-Tolerant Networks(DTNs). Most studies focus on routing problems in idealized network environments without considering social properties. Communication devices are carried by individuals in many DTNs; therefore, DTNs are unique social networks to some extent. To design efficient routing protocols for DTNs, it is important to analyze their social properties. In this paper, a more accurate and comprehensive metric for detecting the quality of the relationships between nodes is proposed, by considering the contact time, contact frequency, and contact regularity. An overlapping hierarchical community detection method is designed based on this new metric, and a tree structure is built. Furthermore, we exploit the overlapping community structure and the tree structure to provide message-forwarding paths from the source node to the destination node.The simulation results show that our Routing method based on Overlapping hierarchical Community Detection(ROCD) achieves better delivery rate than SimBet and Bubble Rap, the classic routing protocols, without affecting the average delay.     

Evolutionary game analysis of low-carbon behavior credit supervision of logistics enterprises

Based on the low-carbon obligation fulfillment of Chinese logistics enterprises, this study constructs a tripartite evolutionary game model to analyze the evolutionary process of the interaction between the local government, logistics enterprises and the public in the process of low-carbon behavior credit supervision. Then using Netlogo software, a parameter simulation experiment is conducted to determine the optimal policy for improving the effect of supervision. The results are as follows: ① The combined influence of the local government and the public can effectively change the strategic choice of enterprises and promote the low-carbon behavior of enterprises. ② In terms of improving the effect of supervision, reducing the cost of government supervision would have a highly significant effect, and reducing the cost of the public would be counterproductive. ③ Increasing the government subsidies to enterprises and the government’s fines to enterprises both have a significant effect, and the effect of improving the former is better. However, increasing the severity of higher-level governments punishing local governments will reduce the stability of the system. ④ Supervision can be more effective by increasing the public’s impact on enterprises’ earnings rather than by increasing government subsidies to the public.     

水平循环荷载引起的砂土沉陷-致密作用对刚性桩承载力的影响分析

为研究砂土中刚性桩基础在循环荷载作用下的承载力演化规律,提出了一种循环后单桩承载力的评估方法.首先,基于沉陷坑与致密区域土体的质量守恒原理,量化了由沉陷引起的土体参数变化;然后,根据API规范中的砂土水平土抗力-位移模型计算循环前后的单桩承载力;最后,提出了循环后单桩承载力的评估模型,并对沉陷坑尺寸、土体初始相对密实度和致密区域模式等因素进行对比分析.结果 表明:单桩承载力随沉陷坑的发展不断增大;对于松砂、中密砂和密砂,循环后的单桩承载力可分别提高约3.0、1.5、1.2倍,提高幅值随相对密实度的增大而降低;2种土体变形模式中,单锥模式相比于双锥模式更符合真实的致密区域形态.     

基于动态阈值的混凝土裂缝高抗噪提取及识别方法

针对表面布有蜂窝麻面等复杂噪声的混凝土裂缝,提出了一种基于动态阈值的混凝土裂缝高抗噪提取方法.首先,通过灰度变换、高斯滤波、信息增强等技术弱化、去除噪声,增强图像中裂缝的亮度,提高裂缝与背景的对比度;然后,采用OTSU阈值分割算法去除伪裂缝,基于裂缝与干扰噪声面积的差异,引入动态阈值,实现各类型裂缝的提取;最后,基于边缘检测和裂缝骨架细化处理,计算裂缝的长度、宽度和面积3项特征参数.基于室内实验和室外实际桥梁拍摄的4组裂缝图像结果表明,4组裂缝的平均宽度分别为2.01、1.07、1.34、0.97 mm,说明该方法适用于不同背景下各类型裂缝的提取,具有较强的鲁棒性.     

Microstructure evolution and reaction behavior of Cu–Ni alloy and B_4C powder system

Microstructure evolution and reaction behavior of Cu–Ni alloy and B_4C power system was studied by in-situ and static experimental investigations along with theoretical calculations. The reaction process was as follows. Firstly,B_4C decomposed into B and C atoms, and then B atoms diffused into Cu–Ni matrix, leading to the formation of Ni_2B particles. Subsequently, Ni atoms diffused into B_4C, forming a loose mixture of Ni_2B and amorphous C at the initial powder boundary. Finally, with the completion of reaction, Ni_2B particles at the powder boundary grew into a monolithic block, and then C substance was excluded out and accumulated at the edge of this monolithic Ni_2B block. It is believed that the formation of Ni_2B phase is caused by the most negative change of Gibbs free energy among all the potential reactions between Ni–B and Ni–B_4C systems.     

基于鲸鱼群算法的柔性作业车间调度方法

针对以最大完工时间为目标的柔性作业车间调度问题,在鲸鱼群算法(WSA,Whale swarm algorithm)基础上,提出一种改进的鲸鱼群算法。首先,设计了一种基于工序加工顺序的个体位置表达方式及相应距离计算方法,使鲸鱼群算法能够直接应用于求解离散型问题。其次,在寻找"较好及较近"鲸鱼过程中引入协同搜索机制,提高"较好及较近"鲸鱼的质量和数量,扩大鲸鱼个体的搜索范围。同时,引入基于关键路径的变邻域搜索算法,搜索当前最优鲸鱼个体的邻域解,提高种群局部搜索能力。最后采用BRdata基准算例进行测试,验证了算法的可行性和有效性。